Input Voltage:
Input Frequency:
Input Current:
Inrush Current:
Load Range:
Ripple and Noise:
Line Regulation:
Load Regulation:
Hold Up Time:
Efficiency:
Altitude:
Protection:
Temperature:
Humidity:
Dimensions:
MTBF: |
|
85~264VAC
47~63Hz
3A at 115VAC or 1.5A at 230VAC max. capacitors
Not exceed 30A at 115VAC input or 60A at 230VAC input, cold
start at 25°C t
With +5V output set between 4.95~5.05V and all output at 60% rated load, and all other outputs in the accuracy range, max. load
can not > 80W convection cooling and > 100W forced air cooling
Peak to peak ripple and noise for each output is < 1% of each output voltage at rated load
< +/-1% at rated load with +/-10% change in input voltage
< +/-1% for +5V, < +/-5% for other outputs with +/-40% change
in measured output loading from 60% rated load and other outputs
at 60% rated laod
> 16ms at 115VAC input and rated load
> 70% at nominal line and rated load
10,000 feet
Short Circuit: Hiccup mode against short circuit or over load
conditions auto recovery to normal after wrong conditions
are removed
Output: Built-in crowbar circuit shuts down outputs to avoid damage. Trip point of over voltage protection is between 5.7~7.0V
AC line ON/OFF restarts and recovers the unit from
over voltage protection
0~50°C, requires forces air of 30CFM for outputs > 80W (operating);
-20~+70°C (storage)
5~95%; non-condensing at 40°C (operating)
15.24 x 8.38 x 3.8 cm within +/-0.4mm tolerance
283,179 hrs. |
|
