Input Voltage:
Input Current:
Inrush Current:
Load Range:
Ripple and Noise:
Line Regulation:
Load Regulation:
Hold Up Time:
Efficiency:
Altitude:
Protection:
Temperature:
Connectors:
Dimensions: |
|
85~270VAC
2A at 115VAC or 1A at 230VAC max.
Not exceed 30A at 115VAC input or 60A at 230VAC input, at
cold start 25°C, and excluding EMI suppression capactiors
All outputs are at min. load conditions, while +5V output is between
5~5.1V and all other outputs are within the specified voltage accuracy range
Peak to peak ripple and noise for all outputs is < 1% of output voltage at rated load
< +/-2% for each output measured at rated load and +/-10%
input voltage range
< +/-3% for +5V, +/-4% for +12V, and +/-5% for -12V with +/-40%
change on the measured output load, +/-40% from 60% rated
load, while keeping other outputs at 60% rated load
> 16ms at 115VAC input and rated load, measured from the end
of the last charging pulse to when the main output drops
down to 95% output voltage
> 70% at nominal line and rated load
10,000 feet
Latch-off mode against short circuit or over load conditions AC
input ON/OFF cycle to restart power supply
Operating: 0~50°C
Storage: -40~+85°C
AC Input: Molex 5277-02A or equivalent device
DC Output: Molex 5273-08A or equivalent device
For Fan Use Only: Molex 5045-02A or equivalent device
12.7 x 7.62 x 3.86 cm at tolerance +/-0.4mm |
