Input Voltage:
Input Current:
Inrush Current:
Ripple And Noise:
Line Regulation:
Load Regulation:
Power Good:
Power Fail:
Efficiency:
Altitude:
Protection:
Temperature:
Humidity:
Connectors:
Dimensions:
MTBF: |
|
19~32VDC
Max. 8A at 24VDC
Not exceed 10A at 24VDC input, cold start at 25°C
< +/-1% peak to peak ripple and noise for each output
< +/-1% at rated load with +/-10% change in input voltage
+/-4% for +5V, +/-5% for +12V, +/-3% for -12V and -5V
Goes high 100~500ms after all DC output are ready
Goes low 0.5ms before any DC output falls
70% typical at nominal line and rated load
10,000 feet
Input: Protection against wrong polarity if 24VDC input is inversely
connected by mistake
Output: Built-in over voltage protection. Trip point of crowbar circuit
is between 5.9~7.0V. Hiccup mode against short circuit or over
load conditions auto recovery when faulty conditions are removed
Operating: 0~50°C
Storage: -40~+75°C
Operating: 5~95%; non-condensing at 40°C
Input: Three positions terminal block
DC Output: Output provides one AT type P8/P9 and two disk drive
connector
To Switch: Female disconnects for tab size 0.250" x 0.032"
14.0 x 15.0 x 8.62 cm with +/-0.8mm and +/-0.4mm tolerance between
186,909 hrs. |
|