Input Voltage:
Input Frequency:
Input Current:
Inrush Current:
Load Range:
Ripple and Noise:
Line Regulation:
Hold Up Time:
Output Power:
Power Good Signal:
Power Redundancy:
Efficiency:
Protection:
Dimensions: |
|
90~132VAC or 180~260VAC selectable
47~63Hz
10A at 115VAC or 6A at 230VAC max.
< 50A at 100VAC, < 100A at 220VAC, < 60A at 230VAC input
cold start, 25°C excluding EMI capacitors
At 100% max. load condition in all outputs, +5V output is
between 4.98V and 5.02V, +3.3V is between +3.25V and +3.35V. All other outputs are within their specified voltage accuracy ranges
Peak to peak ripple and noise for +5V and +3.3V outputs are
< 60mV, and < 120mV for -5V, +12V, and +5Vsb outputs
< +/-1% for +5V, +12V, -12V, and +5Vsb outputs. +3.3V is +/-2%
> 16ms at 115VAC or 230VAC input and max. laod
measured from the last AC line charging pulse to the point
when +5V drops down to +4.75V
Total DC continuous power is within 400W at < 30°C ambient
temperature
Signal goes high from 100~500ms after all output DC voltages
are within regulation limits
This power supply has power redundant capability
65% typical, measured at nominal line and rated load
Built-in over voltage protection circuit. Trip point between 5.7~7.0V AC line off and on cycle for over voltage protection recovery latch
off mode against short circuit or over load conditions
19.2 x 16.8 x 22.0 cm |
