|
Input Voltage: Input Frequency: Input Current: Inrush Current: Load Range:
Ripple and Noise:
Line Regulation:
Load Regulation: Efficiency: Altitude: Protection:
Temperature:
Connectors:
Dimensions: |
|
10~30VDC with normal line at +24VDC 47~63Hz 13A at 10VDC max. < 15A at 10VDC input from cold start excluding EMI capactiors With all other outputs within their specified voltage accuracy ranges and 60% rated load conditions, the +5V output is between 5~5.1V. It could last 10 sec. at peak load and 25°C Peak to peak ripple and noise for +5V is < 50mV, and < 100mV for the other < +/-2% for each output at rated load and < +/-10% +12V and +24V input variables < +/-1% for +5V, < +/-5% for +12V and -12V > 70% at nominal line and rated load 10,000 feet Built-in over voltage protection circuit. Trip point of crowbar circuit is between 5.7~7V hiccup mode against short circuit or over load conditions auto recovery when fault conditions are removed O.C.P. of +5V is 20A max. Operating: 0~50°C Storage: -40~+85°C DC Input: Terminal blocks DC Output: Molex 5273-04A or equivalent device For Fan Use Only: Molex 5045-02A or equivalent device 12.7 x 7.62 x 3.86 cm at tolerance +/-0.4mm |
|